Start with the model number on your machine
Surplus Festool accessories can be a smart buy, but the discount only pays off if the part fits your specific tool. Before you add anything to your cart, find the model plate on your router, saw or dust extractor and compare it with the compatibility details in the product listing. The three items below show how that check works in practice—and where the catalog leaves a question open.
Festool 499799 chamfer bit: router and shank check
- 45° Chamfer Router Bit x 8mm Shank – Festool (499799): For OF 1010, OF 1010 R, OFK 700, MFK 700 routers; 8mm shank; 25mm (1″) diameter; 11mm (3/8″) cut length. The 8mm shank is the first gate: confirm your router accepts an 8mm collet. The listed router models are the only ones named in the catalog, so if yours is not on that list, the fit is not confirmed.

45° Chamfer Router Bit x 8mm Shank – Festool (499799)
Why the 8mm shank matters more than the price
Many routers sold in North America use 1/4″ or 1/2″ collets, while this bit uses an 8mm shank. If your router only has those sizes, you would need an 8mm collet or a different bit—check before ordering. The 45° chamfer angle and 25mm diameter suit edge profiling, but the catalog does not list a maximum RPM or feed rate, so follow your router manufacturer’s guidance for 8mm-shank bits rather than guessing.
Festool 577082 scoring blade: one saw only
- Festool 577082 Scoring Saw Blade for TSV 60: Designed for the TSV 60 K track saw; diamond tooth scores the top layer for splinter-free cuts on both sides; conical tooth shape allows scoring width adjustment. This is not a general-purpose saw blade. It is a scoring blade for a specific track saw, so confirm you own a TSV 60 before buying. The diamond tooth and conical shape are aimed at coated or veneered panels, including HPL and melamine.

Festool 577082 Scoring Saw Blade for TSV 60
Scoring blade vs standard blade: what the catalog confirms
The 577082 is a scoring blade, not a main cutting blade. It scores the top layer before the main cut, which helps prevent splintering on both sides of the cut. The catalog does not state a diameter, tooth count or maximum speed for this blade, so use it only as intended on the TSV 60 and follow the saw’s instructions for setting scoring width.
Festool 496169 wet filter: extractor model and use
- Festool 496169 Wet Filter – CT 26/36/48: Compatible with Festool CT 26, CT 36 and CT 48 dust extractors; use in place of the main filter when vacuuming water; helps prevent foam build-up. The filter is for wet extraction only, and the model list is specific. Check your extractor’s model number—if it is not a CT 26, CT 36 or CT 48, compatibility is not confirmed by the supplied information.
Wet filter vs main filter: a swap, not an addition
The 496169 replaces the main filter during wet pick-up; it is not designed to be used alongside it. The catalog does not include installation steps, so refer to your CT extractor manual for the correct filter change procedure. Because this is a surplus item, availability may be limited—if you need one for an upcoming job, confirm stock before relying on it.
Three surplus accessories, three different fit questions
- Festool 499799 chamfer bit: Fit question: does your router take an 8mm shank and is it one of the listed models (OF 1010, OF 1010 R, OFK 700, MFK 700)?
- Festool 577082 scoring blade: Fit question: do you own a TSV 60 K track saw? This blade is specific to that saw.
- Festool 496169 wet filter: Fit question: is your extractor a CT 26, CT 36 or CT 48? The filter is for wet extraction and replaces the main filter.
A four-step check before you buy surplus Festool
- Find your tool’s model plate: Look for the model number on the router, saw or extractor. Compare it with the compatibility list in the product description.
- Confirm the interface: For router bits, that means shank size (8mm here). For blades and filters, it means the specific tool model.
- Check what the catalog does not state: If a maximum speed, diameter or installation step is missing, do not assume it. Use the tool manufacturer’s documentation or ask before buying.
- Account for surplus availability: Surplus stock can run out. If the part is critical to a job, verify it is in stock and order before you need it.
When a surplus accessory is worth it—and when it is not
A surplus Festool accessory makes sense when the model number matches your tool exactly and you are comfortable with limited stock. It is a poor fit if you would need to buy an adapter collet, if your tool is not on the compatibility list, or if you cannot confirm a critical specification from the listing. In those cases, the savings are offset by uncertainty or extra parts. Use the model-number check above as your first filter, and treat any missing specification as a reason to pause rather than guess.




