Two compact sets, one clear difference
Both sets are built for compact routers and share a 1/4′′ shank, but they solve different first-set problems. The Core Four keeps the bit count low and covers trim, edge, and finish work. The Starter adds two bits and a wear-resistant coating for broader edge forming and template routing.
If you mostly trim edges and soften corners, the Core Four is the leaner starting point. If you expect to rabbet, pattern-route, and work with laminates, the Starter’s extra bits and coating justify the higher price.
What each set includes
- Core Four (4 pieces): 1/4′′ spiral flush trim bit, 1/2′′ down-cut pattern bit, round over bit, and chamfer bit. Covers edge trimming, template routing, corner softening, and 45° bevels.
- Starter (6 pieces): Compression bit, up-cut flush trim bit, chamfer bit, pattern bit, round over bit, and rabbet bit. Adds compression and rabbeting capability, and swaps the down-cut pattern bit for an up-cut flush trim bit.
Core Four: the compact essentials
- The Core Four: Compact Router Bit Set – 1/4″ Shank: 4-piece set: 1/4′′ spiral flush trim, 1/2′′ down-cut pattern, round over, and chamfer bits. Covers the most common trim and edge tasks without buying bits you may not use.

The Core Four: Compact Router Bit Set – 1/4″ Shank - The Core Four: Compact Router Bit Set – 1/4″ Shank: Designed for compact corded and cordless routers; made in USA. Fits the small-router form factor many beginners already own.
- The Core Four: Compact Router Bit Set – 1/4″ Shank: Catalog price USD 145.25 (comparison price USD 226.96). Lower entry cost leaves budget for a second bit later.
Starter: more bits and a coating
- The Starter: 6 Piece Router Bit Set – 1/4″ Shank: 6-piece set: compression, up-cut flush trim, chamfer, pattern, round over, and rabbet bits. Adds rabbeting and laminate-friendly compression cutting to the first kit.

The Starter: 6 Piece Router Bit Set – 1/4″ Shank - The Starter: 6 Piece Router Bit Set – 1/4″ Shank: Each bit has AstraHP coating, which the catalog says extends edge life by 2–3x. Longer edge life matters if you cut abrasive materials or route often.
- The Starter: 6 Piece Router Bit Set – 1/4″ Shank: Router compatibility: compact corded and cordless routers, ideal at 16,000 RPM; 1/4′′ shank. Gives a concrete speed reference for setup on a compact router.
- The Starter: 6 Piece Router Bit Set – 1/4″ Shank: Catalog price USD 260.24 (comparison price USD 346.99). Higher upfront cost buys two more bits and the coating.
Which first set fits your work
Choose the Core Four if your first projects are trim carpentry, edge shaping, and template work with a down-cut pattern bit. The four bits cover clean edge duplication, corner rounding, and chamfering, and the lower price makes it easier to add a specialty bit later.
Choose the Starter if you need a rabbet bit sized for compact router base plates, or if you cut laminates and veneers where a compression bit reduces tear-out. The AstraHP coating is the other reason to pay more: it is aimed at wear resistance and cooler cutting under load.
Neither set is a complete shop in a box. The catalog does not list individual bit diameters beyond the Core Four’s 1/2′′ pattern bit, so check the specific profile you need before buying.
A practical way to decide
- List your first three projects: If they are trimming, roundovers, and chamfers, the Core Four covers them. If any involve rabbets or laminate tear-out, the Starter is the better fit.
- Check your router: Both sets use a 1/4′′ shank and are designed for compact corded or cordless routers. Confirm your router accepts 1/4′′ shanks.
- Weigh coating against bit count: The Starter’s AstraHP coating is claimed to extend edge life 2–3x. If you route occasionally, the Core Four’s lower price may matter more than coating life.



