1.5mm 公制長刃球頭銑刀 – 刃長16mm

Needed to reach a deep inside corner on a mold cavity, and this cutter's 16mm reach let me do it without swapping to a longer shank. The relief grind kept the shaft from rubbing, which saved me from chatter.

Had to plunge a 1.5mm slot deeper than my standard bits could manage, and the relief grind after the flutes made all the difference—no shaft rubbing, no chatter. Cut clean through aluminum without any flex, even at full 16mm reach. Exactly what I needed for tight corners.

Needed to reach deep into a pocket without the shaft rubbing, and the 16mm reach plus the relief grind after the flutes solved that perfectly. Cuts clean and plunge-friendly, no chatter even at full depth.