بت راوتر شطف بزاوية 45° × ارتفاع قطع 1-1/16 بوصة – Whiteside 2310

Took a heavy pass on some oak edge banding and the 45° cut came out glassy smooth with zero chatter. That 1-1/16″ height is a real workhorse, not a toy.

The full 1-1/16 inch cut height means I can chamfer thick stock in a single pass instead of flipping pieces and lining up two cuts. Chatter-free finish right off the bit, barely touched it with sandpaper.

Cut through white oak like it was pine, and the 45° angle came out dead straight on all four table legs. The carbide feels substantial and there was zero tearout even on end grain. Worth every penny for anyone doing serious edge profiling.